大家在查：性致病 hard disc 加动物园朱山 Tea Leaf Publisher House 全身像长镜头 piscivore gray iron

蚀性

网络Corrosion; Etchablity

蚀性

蚀性

Corrosion

... (Density 21.04 g/cm3)、高热蚀性 (Corrosion) 材料，故适宜作为航天引擎耐蚀高温材料、电子工业半导体材料与汽油燃烧触 …

Etchablity

...抗挠强度（Fatigue Ductility）可蚀性（Etchablity）化学清洗性（Chemical Cleaning）可焊性（Solderability）表面处理完 …

1

It has loose and porous structure , poor stability and corrosion resistance which make it essential for the material to be antirust treated .

其结构疏松、多孔，稳定性和耐蚀性差，须进行防锈处理。

2

Results showed that the corrosion resistance of coating being heat-treated was prefer to that of without heat treatment .

结果表明，高温热处理后的镀层耐蚀性优于镀态。

3

The results show that rare earth sealing for anodized film is comparable to that of chromate sealing .

结果表明稀土封孔阳极氧化膜的耐蚀性与铬酸盐封闭阳极氧化膜具有可比性。

4

Corrosion-resistance of piston rods is one of major factors affecting the quality and service life of automobile shock absorbers .

汽车减振器连杆耐蚀性是影响汽车减振器质量和寿命的主要因素之一。

6

Although the corrosion resistance of stainless steels is better than those of other metals, it could corrode under some specific conditions .

虽然有优于其它钢材的抗蚀性，但是仍会受到某些因素的影响而发生腐蚀。

7

The polarization curves of aluminized steel without and with a post oxidation treatment were measured in H2S saturated solution .

用极化曲线方法对氧化处理前后的渗铝钢在饱和 H2S 水溶液中的耐蚀性进行了研究。

8

Stainless steels have been widely used in various fields due to their good corrosion resistance and mechanical properties.

由于不锈钢良好的耐蚀性及机械性，而被广泛的应用。

9

The powder dope used to the corrosion resistance especially heavy corrosion resistance and special circumstance need to develop immediately.

耐蚀性、尤其是耐重腐蚀和特种环境粉末涂料的开发研制，则显得更加重要与紧迫。

10

Suitable surface treatments which were used to improve the corrosion resistance of magnesium alloys were very significant .

但是，镁合金的耐蚀性比较低，使它的应用受到很大的限制。

13

TEMPORARY ANTICORROSION PRODUCTS . ANTICORROSION AND WATER DISPLACEMENT CHARACTERISTICS .

暂时防蚀产品 .防蚀性和排水量的特点

14

The corrosion resistance of the overlaid layer was assessed by means of the polarization curve .

利用极化曲线评价了熔覆层的耐蚀性。

16

Corrosion resistance: check cladding material with salt test machine , the test pass at least 24 hours later , then it is qualified .

耐蚀性：以盐雾测试机检测镀层，其至少要 24 小时以上盐雾测试通过，才视之为合格。

17

The sealing treatment of anodized aluminum and its alloys is required for improving the anti- fouling and corrosion resistance performances.

为提高铝及其合金氧化膜的耐蚀性和耐污能力，必须对膜作常温封闭处理。

18

The result shows that the amount of Fe increases in the spray welding layers , the corrosion resistance would be reduced.

结果表明，喷焊层中铁含量的增加对耐蚀性有不利的影响。

19

It's obviously that corrosion -resistance and brightness are much better than those of Zn plating .

实验结果表明，其耐蚀性和光亮度明显优于镀锌层。

20

Tests showed that the films in water and closed the best corrosion resistance, low porosity layer .

试验表明，在水中封闭的膜层的耐蚀性最好，膜层的孔隙率较低。

22

The electrochemistry analyses show that the higher the current density , the higher the corrosion-resistence characteristic .

电化学分析表明随着电流密度的增大，镀层的耐蚀性相应增强。

23

Convenient construction , good binding ability with parent material ; good plastic property and good fireproof and corrosion resistant .

施工简便，与基体结合性好；可塑性和耐火耐蚀性好。

28

Working pressure, temperature and abrasion resistance is the choice of pneumatic ash handling the main basis for pipe material .

工作压力、工作温度和耐磨蚀性是选择气力除灰管道材料的主要依据。

29

The improvement of the pretreatment technology can improve the corrosion resistance and anchoring strength of the film .

改进预处理工艺可进一步提高镀层的耐蚀性和镀层与基体的结合力。

热词推荐

大家在看