大家在查： coup bramble adverb 品尝 variation massively hiking unlit 反面无底

heat treatment

美英

na.热处理
网络淬火；热处理改色；金属热处理

heat treatment

heat treatment

英-汉网络释义

heat treatment

na.

1.热处理

1

However , they usually require heat treatment to produce a surface hard enough to give satisfactory resistance to wear .

然而，它们通常需要经过热处理，以生成表面的硬化层来达到足够的耐磨性。

2

Steel for carburizing is usually a low-carbon steel of about 0 . 15% carbon that would not in itself responds appreciably to heat treatment .

用于渗碳的一般是含碳量约为 0.15%、本身不太适合热处理的低碳钢。

3

The heat treatment regimes of the alloy are constituted by means of the DTA curve analysis and a trial and error method .

通过差热曲线分析及尝试法，制定出合金的热处理工艺。

4

Test shows that the depth of residual compressive after chemical heat treatment is correspondent with that of diffusion layer .

试验表明，化学热处理后残余压应力的深度往往与渗层深度相一致。

5

Results showed that the corrosion resistance of coating being heat-treated was prefer to that of without heat treatment .

结果表明，高温热处理后的镀层耐蚀性优于镀态。

8

9

The crane for quenching , possess the peculiarity of speedy descent , is usually applied in heat treatment .

淬火起重机具有高速下降特性，常用作为热处理工艺装备。

10

The influence of heat treatment on the surface morphology and corrosion-resistance of Ni-P alloy coating was studied in this paper.

研究了热处理对镍磷合金镀层的表面形貌和耐腐蚀性的影响。

12

Heat treatment process has no effect on the propagation mode of thermal fatigue crack and the shape of crack at the sample notch .

热处理工艺对裂纹在试样缺口处的形态及裂纹的传播方式无影响。

13

embedding the target in the iron container filled with the fine iron sand; and carrying out the heat treatment of the target .

将所述靶材埋入装有细铁砂的铁质容器中，对所述靶材进行热处理。

15

18

the heat treatment process, microstructure and properties of the free-cutting plastic die steelP20SRE have been investigated .

研究了 P20SRE 易切削塑料模具钢的热处理工艺、组织与性能。

19

The heat treatment furnace comprises the heating furnace and a quenching device .

热处理炉包括所述加热炉，还包括淬火装置。

21

A new technology of heat treatment has been approached for increasing the toughness and working life of the files made of T12A steel .

试验探索了一种提高 T12A 钢制性刀韧性及使用寿命的热处理工艺。

22

The welding (heat treatment )of pipes have been carried out with incorporated programming .

管子的焊接（热处理）现已按照编写的程序完成。

28

The improvement in the heat treatment technology of the stamping die for the silicon steel sheet was introduced .

介绍了硅钢片冲模热处理工艺的改进。

29

30

The flowchart with its performance, quality control measure and heat treatment process were investigated for DNV rigid multi-joint tie .

研究了 DNV 多节刚性拉杆的生产工艺流程及其实施过程、质量控制方法和热处理工艺。

热词推荐

大家在看