大家在查：高山仰止丹尼维尔贝克 skeletonized 皮尔·卡丹 EmmanuelTodd 泌尿系 LucyCXB 杂面 NIKEI meerschaum

焊接头

n.soldered fitting
网络welding head; welding joint; Welded joint

焊接头

英-汉网络释义

焊接头

welding head

船舶专业词典.xls ... 542 风雨密盖 weather proof cover 544 焊接头 welding head 545 焊接程序试验 welding procedure test ...

welding joint

航海及海运专业英语词汇(W2) ... welding jig 焊接夹具 welding joint 焊接头 welding lead 焊接导线 ...

Welded joint

공업용어-W |... ... Welded branch connection 焊接支管连接 Welded joint 焊接头，焊逢 Water cooled compressor 水冷式压缩机 ...

welded connection

电焊英语专业词汇_百度文库 ... Welded chain 焊接链 Welded connection 焊接合，焊接头 Welded construction 焊接结构 ...

soldered joint

石油英语词汇(S5) - 商务英语词汇 ... solder bead 焊点 soldered joint 焊接头 sole agency 独家代理 ...

Welding point

钢丝帘线相关拉丝英语术语列表 - 豆丁网 ... Weight of coll 盘重 Welding point 焊接头 Welding machine 对焊机 ...

butt

海商海事术语——海上保险-... ... 46、fairing 整形 47、butt 焊接头 48、light load line 空载水线 ...

metal inert-gas welded joints

MIG焊接头,metal... ... ) Plasma-MIG Welding 焊接 ) metal inert-gas welded joints 焊接头 ) MIG wielding joint 焊接接头 ...

例句：

Grain refining was the main reason for the improvement of the FSW joint 's strength and toughness .

细晶强化是搅拌摩擦焊接头强度与韧性提高的主要原因。

Care must be taken to ensure that the surfaces are thoroughly clean first , FOR dirt will weaken the weld .

必须注意，首先要保证焊接头表面十分清洁，因为污物会减弱焊缝的强度。

The results show that the root flaw "kissing-bonds" defect is major factor of affecting friction stir welding fatigue behavior .

焊缝根部 “吻接 ”缺陷是影响搅拌摩擦焊接头疲劳行为的主要因素。

The results showed that the strength of laser welded joints was increased and the elongation rate was decreased compared with base metal.

结果表明：与母材相比激光焊接头的强度升高，延伸率下降；

The microhardness of twin spot laser welded joint is higher than that of single spot laser welded joint , but lower than that of base metal.

双光点激光焊接头各区域硬度低于母材，但高于单光点激光焊接头；

Weld of CLAM plates T -welded joints was good shape , but there existed an obvious angle distortion in joint flange .

CLAM 钢 T 型焊接头焊缝成型良好，但接头翼板存在明显的角变形。

All socket-welded joints shall be dye- penetrant examined final pass only .

所有承插焊接头只须通过最后的色渗透检测（即可）。

The microstructure and properties in welded joint were analyzed and researched .

对焊接头的组织与性能进行了实验分析和研究；

Welding - Fusion -welded joints in steel, nickel, titanium, and their alloys.

焊接 -钢、镍、钛及其合金熔焊接头

The effect of post-weld heat treatment on the impact toughness in inertia friction welded joints of carbon steel was studied in this paper.

研究了焊后热处理对碳钢惯性摩擦焊接头冲击韧性的影响。

In the spear or written parts can be installed welding head .

在枪头或者笔头部位可安装焊接头。

Cutting of printed board lead wire welding tip of electrical industry .

用于电子行业印刷电路板引线焊接头的切割。

Therefore, the laser modification welding is an effective method in order to strengthen the laser welding joint .

表明了激光修饰焊是强化铝合金激光焊接头的有效方法。

This paper has studied the effect of heat treatment on the mechanical properties and structure of the welded joints.

研究了热处理对摩擦焊接头力学性能和显微组织的影响。

Stress corrosion in flash welding butt joint of steel bar HRB400 is studied .

针对 HRB400 钢筋闪光对焊接头的应力腐蚀过程进行研究。

Probability Distribution of Fatigue Life of Notched Friction Welded Joints under Variable-amplitude Loading and Its Simulation

变幅载荷下摩擦焊接头疲劳寿命的分布及模拟

Accelerated Test Study of Residual Life Mathematical Model for the Friction Welded Joints in Boiler Snake Pipe

锅炉蛇形管摩擦焊接头残余寿命计算模型

Microstructural Characteristics and Mechanical Properties of Laser Weld Bonded Joints in Magnesium Alloy

镁合金激光胶接焊接头微观及力学性能

Study of ANN-based friction stir welding joint quality forecasting system

基于神经网络的搅拌摩擦焊接头质量预测系统研究

Finite-element Analyses on Stresses Distribution of Hot-plate Welded Joint of High-density Polyethylene Plastic Pressure Pipes

高密度聚乙烯塑料压力管道热板焊接头应力分布有限元分析

An Analysis of Manufacturing Technology of the Expanding and Welding Joint of Tube to Tube-sheet in Heat Exchanger

换热器管子与管板胀焊接头制造工艺分析

焊接头

焊接头