大家在查： Estring 海克尼威尔伯·莱特 hemodynamometer AlvinKwock Alichino 二千零八转移反对派电视系列片罗比吉内普里

正火

v.be prosperous; normalize
n.normalization
网络normalizing; Normalized; NBK

正火

英-汉网络释义

正火

normalizing

机械专业英语词汇_百度文库 ... 退火 anneal 正火 normalizing 脱碳 decarburization ...

Normalized

...d），光亮退火（Bright Annealed）；正火（Normalized），去应力退火（SR），辉桶退火，球化退火（Spheroidize Anneal…

NBK

精密无缝钢管力学性能表正火（NBK）退火（GBK）精密无缝钢管人气:187 40cr钢管|40Cr无缝钢管人气:254 20Cr钢管|20c…

normalize

日本工业标准JIS - 豆丁网 ... (annealing 退火)； (normalize 正火)； Q(调质)； (Anisotropy 无取向)； ××××为频率50 ...

normalization

铸造单词英汉对照_百度文库 ... 弹丸： projectiles 123 正火： normalization 124 纯净度： purity 125 ...

tempering

[机械/制造]五金行业英文术语大全 - 豆丁网 ... dead-soft annealing 回水 tempering 正火 normalizing 淬火 ...

normalization metallurgy

例句：

The results show that the causes of the fracture are the abnormal graphite nodulizing, and shrinkage , slag inclusion and normalizing cracks .

结果表明，零件断裂的原因是缩孔和夹渣等铸造缺陷、组织球化不良以及存在正火裂纹。

Being compared with the normalized steel, the quenched and tempered steel can led to a joint with higher strength and toughness .

正火态与调质态母材相比，后者可得到强韧性较高的接头。

1Heat-treatment is used to normalize, to soften or to harden steels .

热处理可用来对钢正火、退火或淬火。

Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels , normalized.

压力容器用扁平钢轧材 .第3 部分：经过正火处理的可焊细晶粒钢

The fatigue strength of hardening and tempering coated specimens were higher than that of normalizing coated specimens .

在正火处理后，涂层试样的疲劳强度大于未涂层试样；

The types of ordinary heat treatment of steel are annealing, normalizing, quenching and tempering .

普通热处理分为退火、正火、淬火和回火。

Higher cooling speed is the main difference between annealing and normalizing .

正火与完全退火的主要差别在于冷却速度快些。

Above mentioned effect would be more appreciable when the cast iron is modified and subsequently normalized .

若变质后再进行正火处理，则上述效果更为明显。

Hardness of substrate was increased after normalizing or hardening and tempering.

正火或调质处理能够提高涂层基体的硬度；

Effect of isothermal normalizing process parameters on structure and hardness of forged gear stocks, has been discussed in this paper .

本文主要阐述等温正火工艺参数对锻坯组织、硬度及其均匀性的影响。

This paper deals with the structure of the cast steel with spheroidal graphite and the forming mechanism after normalizing and forging .

本文作者研究了球墨铸钢正火和锻造后的组织特征，并对其形成机理作了探讨。

The results show that X80 pipeline steel obtains sorbite after quenching and tempering , gets pearlite by normalizing .

结果表明：X80 钢经调质处理后得到索氏体，正火得到珠光体。

for most ferrous alloys , normalizing and annealing are not synonymous.

而对于大多数铁类合金，正火和退火意义不同。

The structural change of Q235 steel was studied in the action of unsteady pulse electric current after normalising.

研究了 Q235 钢在非稳态脉冲电流作用下正火后组织的变化。

The forging crankshaft must normalizing and quenching - tempering in order to gain microstructure ready for surface strengthening .

模锻钢质曲轴须经正火、调质处理，为表面强化作好组织准备。

General thinking to draw up the isothermalizing process according to TTT digram of steels has been probed into .

根据材料的奥氏体等温转变曲线，探讨了等温正火工艺拟订的一般思路。

The test result has proved that the analysis accuracy is very high for normalizing 35 steel under random loading .

经正火 35 钢随机载荷疲劳试验验证，其可靠性分析精度较高。

RT2-320-9 for general metal parts , in the air for normalizing , annealing, quenching and heat treatment heated.

RT2-320-9 适用于一般金属零件，在空气中进行正火、退火、淬火等热处理加热。

They are annealing , normalizing, hardening, and tem- pering.

它们是退火，回火，与正火。

Normally annealing and normalizing are used as preheating treatment , so how to choose heat-treatment process and in what case ?

退火和正火通过作为预先热处理应用，那么在什么情况下选用何种热处理工艺呢？

正火

正火