大家在查：锡基巴氏合金铅基巴氏合金软基硬质点铅基合金旋转精度尺寸精度游隙非接触式密封预润滑轴承

内部游隙

网络Internal play; CACBCC

内部游隙

内部游隙

内部游隙

Internal play

滚动轴承技术词汇 ... ... Internal hexagon head screw 内六角螺钉 Internal play 内部游隙 Internal thread 内螺纹 ...

CACBCC

通用配组轴承的型号带有后缀，即表示内部游隙（CACBCC）或预紧（CACBCC）。定购通用配组轴承时，要指明的是所需单 …

2

The axial internal clearance of the double row bearings is at least 0 , 5 mm .

双列轴承的轴向内部游隙为至少 0 ,5 毫米。

3

As the bearing is driven up the tapered seating , its radial internal clearance is reduced .

轴承径向内部游隙随着轴承在圆锥轴颈上的推进而缩小。

4

CARB bearings are produced as standard with Normal radial internal clearance and most are also available with a larger C3 clearance .

CARB 轴承以常规径向内部游隙为标准制造，多数还备有游隙较大的 C3 组。

7

Dimensions, tolerances and internal clearance of NoWear bearings are the same as for standard bearings .

NoWear 轴承的尺寸、公差和内部游隙与标准轴承相同。

8

The bearing sets of standard metric bearings are produced with the axial internal clearance provided in table 2 as standard .

标准公制轴承构成的轴承组在生产时带有如表 2 所列的标准轴向内部游隙。

9

The spherical roller bearings of the metric SKF ConCentra units have C3 radial internal clearance .

SKF 公制 ConCentra 单元的球面滚子轴承具有 C3 径向内部游隙。

10

The axial internal clearance is determined by the sleeve .

轴向内部游隙取决于套筒。

11

The narrow cam rollers have C3 radial internal clearance as standard .

标准的窄凸轮滚子有 C3 径向内部游隙。

12

13

C3 radial internal clearance to ISO 5753: 1991 (table 2).

标准 C3 径向内部游隙符合 ISO5753：1991 （表 2 ）。

14

The maximum permissible internal clearance or the maximum permissible friction has been reached (for bearings which require maintenance ), or

当允许的最大内部游隙或最大摩擦（对需维护的轴承而言）达到后，或

15

The radial internal clearance of the bearing in operation ,

轴承在运转时的径向内部游隙，

16

The radial internal clearance limits are listed for bearings with

有关径向内部游隙的限值

17

Axial internal clearance smaller than Normal

轴向内部游隙小于普通级

18

Axial internal clearance greater than Normal

轴向内部游隙大于普通级

19

Axial internal clearance in lower half of Normal range

轴向内部游隙在普通级范围的下半部分

20

Axial internal clearance in upper half of C2 range

轴向内部游隙在 C2 范围的上半部分

热词推荐

大家在看