大家在查： main questions nanoscale 比布莱尔红毯 dynamicshiftregisters yellow umbrella man appeared 暮气 cook cooks next super

splines

美 [sp'lɪnz]英 [sp'lɪnz]

n.【机】花键；方栓；止转楔；齿条
v.开键槽于；用花键(或方栓)联接
网络样条线；样条函数；样条曲线支持

复数：splines

splines

splines

英-汉英-英网络释义

splines

样条线

用样条线（splines），直线Line（按住Shift就是直线了），方行Rectangle，圆形Circle。评论| 2009-06-15 3d max 2009画线的 …

样条函数

石油英语词汇(S5)--石油百科 ... splined shaft 花键轴 splines 样条函数 splint 暗硬煤 ...

花键

花键（Splines）是你连接2个关键帧之间的方法，但是它可以让你对音频标准，颜色校正和回放速度进行非常细微的控制。

样条曲线支持

...rph-weight animation） 5. 样条曲线支持（splines） 6. 克隆（cloning） 7. 播放方法、以及停止继续方法（play(), play("clipNa…

绘制曲线

欢迎访问园林计算机辅助设计课程网站 ... 5.2 图案填充( Bhatch) 3.1 绘制曲线 Splines 3.1.2 多边形 NGon ...

样条级

曲线板

美英加陆军规格_馆档网 ... "可挠曲线规"," spline curve" "曲线板"," splines" "轮辐"," spoke" ...

1

The one-dimensional many-knot splines interpolation algorithm is extended to that of two dimensions , which is applied to image processing.

将一维多结点样条插值算法推广到二维，建立了用于图像数据的插值公式；

2

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine .

为了使气动热力模型更好的逼近涡轮发动机，应用成熟的非均匀 B 样条来拟合部件特性。

4

Straight-sided splines for cylindrical shafts with internal centering . Dimensions , tolerance and verification .

内径定心平行边圆柱形花锥 .尺寸，公差和检验

5

This machine can broach unthreaded holes and internal splines by replacing the main and auxiliary tool holders and the industrial equipment.

3 本机床通过更换主、辅刀夹头及工装可拉削不同的光孔和内花键。

8

The inner gears have been made with splines and a bevel modifier .

内部的传动机构是用样条线配合倒角修改器做出来的。

9

This system works with straights and arcs, as opposed to splines, for a fast and accurate method of laying down track .

这一系统使用直轨和弯道来代替花键以提高轨道铺设的的速度和精确性。

10

Cubic splines interpolation was used to get smooth corneal surface .

采用三次样条曲线插值角膜的内外表面。

11

Finally, a part distortion of mesh is realized with both Multilevel B-Splines surfaces fitting method and triangular parameterization.

将多层次 B 样条曲面拟合方法与三角网格参数化结合，实现了三角网格模型的局部变形。

13

This tool helps us to create several sections of an object from cutting lines by drawing Splines over the model.

此工具可以帮助我们创建一个物体的零件，通过在物体表面画分割线。

15

The change of direction places stress on the contact points of the splines , locking the drive shaft and hub together .

方向改变给花键的触点施压，把驱动轴和毂盘锁在一起。

16

I also used editable poly, and sometimes also splines , to model the scene for my lamp to be placed into (Fig . 06 and 07).

我还是使用多边形建模，有时也用样条曲线，来构建放置古灯的场景，如图 6 和图 7 。

18

19

Also, some forms of splines have singularities where the curve veers off into infinity .

样，一些形式的曲尺有奇异点，在这里曲线转向无穷远。

20

Quadratic splines need at least 3 points .

二次曲线样条至少需要 3 个点。

21

Non-Uniform Rational B-Splines (NURBS) provide a powerful tool in Geometric modeling and have been widely used.

非均匀有理 B 样条（NURBS ）因其优越的性能而在几何造型中校广泛应用。

22

The four splines in the preceding illustration share the same tangent line at the starting point .

上面插图中的四个样条共享起点处的同一条切线。

24

Techniques for interacting with scene geometry , lights and Splines .

技术与现场几何，灯光和样条。

27

If all is well , clean the splines of the drive shaft and inside the hub thoroughly .

如果一切都正常，全面清理驱动轴的花键，还有轮毂内侧。

28

Splines are permanent keys integral with the shaft , fitting in keyways cut in the hub .

样条与轴，在削减键槽的枢纽永久不可分割的关键配件。

29

Defines Bezier splines and identifies the classes needed to draw them .

定义贝塞尔样条并确定绘制这些形状所需的类。

热词推荐

大家在看