大家在查： dunder 沃勒斯坦 StephenBosworth Rossabi 穆希卜 Ange CIFOR 青水绿 ovarian follicle 埃里卡哈里森

hot rolled

美英

un.暖机预备
网络热轧；热轧的；热卷

hot rolled

hot rolled

英-汉网络释义

hot rolled

un.

1.暖机预备

1

The effort of rotary de-scaling on the surface quality of a pickled hot-rolled strip is shown in figure 9 .

图 9 表明了旋转除锈器对于热轧板带表面质量的影响。

6

The bubbles on the surface have bad effect on the appearance quality and further resistance of rusting of hot rolled ribbed bar .

前言：热轧带肋钢筋表面氧化铁皮 “起泡 ”现象，严重影响产品外观和防锈效果。

7

Other flat -rolled products of iron or non-alloy steel , hot-rolled , not in coils, with patterns in relief, of a thickness of less than 3 mm.

其它热轧之铁或非合金钢扁轧制品，非卷盘状，厚度小于 3 公厘，经轧压凸纹者。

8

In the process of rolling machining and exposure to air, the hot-rolled wire will inevitably be formed a thin oxide scales on the surface .

其在轧制过程中以及在之后的空冷过程中，表面会自然形成一层薄的氧化铁皮。

9

At last , the paper will choose one or two kind of hot-rolled oil which have the better performance to prepare for the debugging in future .

最后，结合模拟实验研究的结果，本文将从中筛选出一种或者两种性能较优的热轧油为今后的现场调试工作做好准备。

10

HRB500 bar is a new hot rolled ribbed bar with hi -strength and strong ductility , which has been used widely in foreign countries.

HRB500 级钢筋是一种强度高、延性好的新型热轧带肋钢筋，在国外已得到广泛应用。

11

Other flat -rolled products of stainless steel , hot-rolled , not in coils, of a thickness of less than 3 mm.

其它热轧不锈钢扁轧制品，非卷盘状，厚度小于 3 公厘者。

12

Finally , FEA was used to analyze the drawing performance of those high strength hot rolled sheet metals.

最后，本文对几种高强度热轧钢板的圆筒拉深过程进行有限元分析。

14

H section of iron or non-alloy steel , not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm.

铁或非合金钢制 H 型，热轧、热抽或挤制后未进一步加工，高度小于 80 公厘者。

15

The cost of the benchmark hot rolled coil steel is likely to hit $725-$750 a tonne by the end of next quarter , up from $550 in January .

基准的热轧卷钢的成本可能在下个季度末达到每吨 725 至 750 美元，而 1月份只有 550 美元。

16

Other flat -rolled products of stainless steel , hot-rolled , not annealed and pickled, not in coils, of a thickness exceeding 10 mm.

其它热轧不锈钢扁轧制品，未经热轧退火酸洗，非卷盘状，厚度超过 10 公厘者。

17

U, I or H sections , not further worked than hot - rolled, hot-drawn or extruded, of a height of less than 80mm.

槽钢、工字钢及 H 型钢，除热轧、热拉拔或热挤压外未经进一步加工，截面高度低于 80 毫米。

18

Therefore , the hot-rolled sheet annealing temperature should be as low as possible with the precondition of fully recrystallization.

所以，在保证热轧板发生完全再结晶的前提下，退火温度应尽量低。

19

Other flat-rolled products of stainless steel , hot-rolled , not in coils, of a thickness of 3 mm or more but less than 4 . 75 mm.

其它热轧不锈钢扁轧制品，非卷盘状，厚度 3 公厘及以上，但小于 4.75 公厘者。

20

Fabricate frames , concealed stiffeners, reinforcement , edge channels, louvers and mouldings from either cold-rolled or hot-rolled steel .

制造门框，内加强筋，加强板，边槽，百叶窗和模件，可选用冷轧或者热轧钢板。

22

Other flat -rolled products of stainless steel , hot-rolled , not in coils, of a thickness exceeding 10 mm.

其它热轧不锈钢扁轧制品，非卷盘状，厚度超过 10 公厘者。

23

Therefore , the choice of hot-rolled oil in the rolling process , as well as the changes is very import to the quality of hot-rolled strip .

因此，热轧油的选择以及对其在轧制过程中变化情况的研究对于提高热轧板带质量非常重要。

25

26

'Steel buyers in the United States are bearish on the price outlook for hot-rolled , ' he says .

马库斯说，美国的钢铁买家看跌热轧钢的价格前景。

27

28

T section of iron or non-alloy steel , not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more .

铁或非合金钢制 T 型，热轧、热抽或挤制后未进一步加工，高度 80 公厘及以上者。

热词推荐

大家在看