《《《《《《《《内容已删除》》》》》》》》》

大家在查：宝莲麦克玛斯特 deoxidant Clemence toroids 乘船出游巨野县 dumpling soup 辛苦艰难 Nabukalou

MM-200

MM-200

MM-200

MM-200

1

For tracks of less than 200 m, the handlebar grips shall be 920 mm from the ground (distance measured from the top of the grips ).

如果跑道少于 200 公尺，车把把手距离地面的距离，要达到 920 公厘（从车把的顶部测量）。

2

Bars and rods of alloy tool steel , not further worked than forged , of a diameter 200 mm or more .

合金工具钢条及杆，锻造后未进一步加工，直径 200 公厘及以上者。

3

The hardness and wear resistance of welded metal was tested using HR-150A Rockwell Hardness Tester and MM-200 Wear Testing Machine .

利用 HR-150A 洛氏硬度计和 MM-200 磨损试验机对堆焊层的硬度和耐磨性进行测试。

4

The chlorination is performed in a tubular reactor of Duran glass about 2 m high and 200 mm in diameter .

氯化处理是在一个管状的 2 米高 200 毫米直径的杜拉玻璃反应器中进行的。

6

7

Japan Meteorological Agency said , Fukuoka Prefecture and Yamaguchi Prefecture and other areas will be 24-hour rainfall of 200 mm .

日本气象厅称，福冈县和山口县等地区的 24 小时降雨量将达到 200 毫米。

8

condition of the belt cord strip 200 mm width .

状态条腰带绳索 200 毫米宽。

9

The Tangjia Township in Leizhou has been the worst hit, receiving 739 mm of rainfall in 24 hours , the heaviest in 200 years .

在唐家镇雷州已受影响最严重的，接收七百三十九毫米降雨量在 24 小时内，最严重的 200 年。

10

July and August is the rainy season , with monthly precipitation above 200 mm and 16 to 18 wet days .

七八月份为雨季，月降雨量超过 200 毫米，每月阴雨天达到 16至18 天。

12

Travel ranges between 50 mm and 200 mm .

行程范围在 50 毫米和 200 毫米之间。

16

specification for gudgeon pins up to 200 mm diameter

直径可达 200mm 的活塞销规范

17

NOT GO segmental cylindrical bar gauges over 120 mm up to 200 mm nominal diameter

公称直径大于 120 至 200mm 孔用过端塞规 .扁圆柱规体

18

GO segmental cylindrical bar gauges over 120 mm up to 200 mm nominal diameter

公称直径大于 120 至 200mm 孔用过端塞规

19

General-purpose GO screwring gauges for ISO metric screw threads from 1 mm up to 200 mm nominal diameter

一般用途的螺纹公称直径 1 至 200mm 的 ISO 米制螺纹过端环规

20

GO screw ring gauges for ISO metric screw threads over 50 mm to 200 mm nominal diameter for use in precision engineering

精密机械用螺纹公称直径大于 50 至 200mm 的 ISO 米制螺纹过端环规

热词推荐

大家在看