大家在查：气体轴承固体润滑轴承磁流体轴承电磁轴承粉末冶金轴承微动磨损回火色轴承衬分流阀不锈钢球阀

粘着磨损

网络adhesive wear; Adhesion wear; additive wear

粘着磨损

粘着磨损

粘着磨损

adhesive wear

齿轮术语英语词汇_百度文库 ... addendum surface 上齿面 adhesive wear 粘着磨损 adjustability 可调性 ...

Adhesion wear

粘结磨损,adhesive... ... ) Adhesion wear 粘着磨损 ) tacky rub-off 粘性磨损 ...

additive wear

材料专业英语词汇 – 【人人分享-人人网】 ... 磨损失效（ wear failure） 粘着磨损（ additive wear）腐蚀疲劳（ corrosion fatigu…

1

Adherence and plastic deformation are dominant under dry sliding. Plowing and slight abrasive wear are dominant under water lubrication .

干摩擦时的磨损机理为粘着磨损和塑性变形，水润滑时主要为犁削和轻微的磨粒磨损。

2

The wear mechanism of the nanotube layers involved abrasive wear, fatigue wear, adhesive wear and oxidative wear .

纳米管层的磨损机理主要为磨粒磨损、疲劳磨损、粘着磨损和氧化腐蚀磨损。

3

The adhesive wear was the main wear mechanism for copper .

纯铜材料的磨损机制主要为粘着磨损；

4

During friction process adhesive wear occurred for pure copper, but delaminating wear occurred for Cu-graphite composites .

摩擦过程中纯铜发生粘着磨损，铜 -石墨复合材料却表现为剥层磨损。

5

The adhesive wear was the dominative wear mechanism .

磨损机制以粘着磨损为主。

6

Under dry friction , resin was pyrolyzed and occurred adhesive wear for rising of friction surface's temperature .

在干摩擦条件下，树脂由于摩擦温升发生热分解，发生粘着磨损。

7

The main wear mechanisms are oxidation wear, adhesive wear, and abrasive wear .

主要磨损机制为氧化磨损、粘着磨损和磨粒磨损。

9

The dominant wear mechanism of the alloy is adhesive wear and abrasive wear .

合金主要磨损机制为粘着磨损和磨粒磨损。

10

The main fretting wear mechanism is abrasive wear and adhesion wear .

磨损机理主要为粘着磨损和磨粒磨损。

11

Adhesive wear is also found while smaller amount of reinforcements in the composites.

增强相含量较低时，刀具同时发生粘着磨损；

12

The main wear mechanism is adhesive wear and abrasive wear .

该材料的主要磨损机制为粘着磨损和磨粒磨损。

13

There are five forms of wear and wear : abrasive wear, erosive wear, adhesive wear, fatigue wear and corrosive wear .

磨损有五种磨损形式：磨料磨损、冲蚀磨损、粘着磨损、疲劳磨损和腐蚀磨损。

14

The wear mechanism of composite is adhesive associate with abrasive in the air , as load increase, the wear mechanism changed into fatigue ;

空气中复合材料主要以粘着磨损为主，并伴有少量磨粒磨损，随着载荷增加，磨损机制由粘着磨损转变为疲劳磨损；

15

During low load and low velocity , there was plastic deformation on the worn surface and were mainly abrasive wear and adhesion wear ;

在低速低载时，MC 尼龙及其复合材料的磨损表面发生了明显的塑性形变，磨损机理为磨粒磨损和粘着磨损；

16

Research of Fractal Theory of Adhesive Wear of Engineering Rough Surface

工程粗糙表面粘着磨损的分形学研究

17

Study on Adherence Abrasion and Influenced Factors

粘着磨损及影响因素的研究

19

Adhere Abrasion and Fatigue Wear of Materials

材料的粘着磨损与疲劳磨损

20

Analysis on adhere abrasion of bush of diesel engine

柴油机轴瓦粘着磨损分析

热词推荐

大家在看