大家在查： Lower Reaches gluteal 亨德利对角 violators 肚子里 atrium 丝绸做成 Nayakshin 赤峰市

棒材

na.bar
网络Bars; bar stock; steel bar

棒材

英-汉网络释义

棒材

bar

tobo ... Bar Section 型材 Bar 棒材 Wire Rod 线材、盘条 ...

Bars

ASTM材料规范书 ... 板材 Plates 棒材 Bars 管材 Tubular ...

bar stock

数控常用工艺术语-轻松数控网 ... 1.2.8板材： plate 1.2.9棒材： bar stock 1.2.10铸件： casting ...

steel bar

句子翻译_专业词汇在线翻译 ... steel ball division degree 钢球分度 steel bar 棒材 steel bar 钢筋 ...

ROD

/rd是什么意思_百度知道 ... 19.retinal detachment 视网膜脱落 20.rod 棒，棒材，杆 22.roof drain 屋顶排水管 ...

bar mill

2001年，公司在棒材（bar mill）领域进行了收购，出资1.15亿美元收购了Auburn钢铁的bar 部门，2002年纽柯出资6.15亿美元 …

rods

自己整理了一下工控的日常用语翻译... ... 板材 steel plate 棒材 rods 保质期 shelf-life ...

rods and bars

进出口行业词汇英语翻译(R) ... rods and bars of aluminium alloy 铝合金棒材 rods and bars 棒材 rodtool rig 钻杆式冲击钻机 ...

例句：

An operation whereby the surface of a bar is ground without using a lathe .

无须使用车床就可以研磨棒材表面的操作。

Your semi-finished products , either pipes , tubes, cables, or bars will sustain consistency in terms of properties and quality standard .

您的半成品如管材，电缆和棒材将保持性能和质量标准的一致性。

The surface bubble of 2A14 aluminium alloy rods is the main reason that results in the wasted product .

2A14 铝合金挤压棒材表面气泡是造成棒材废品的主要原因之一。

The minor lead would be found in lead-free solder rods after using them, then it makes the lead contaminant for the electronic components .

在无铅焊锡棒材上使用后都会发现含有少量的铅，而后会对对其电子元件造成铅污染。

The weight of the balance weight and the tension straightening length of the bar are obtained by calculation .

通过计算得到配重砝码重量和棒材的拉伸矫直长度。

Aimed at a uniform distribution of driving torques , an optimization design of pass parameters is carried out for primary bar rolling mills .

以某棒材粗轧机组力矩均衡分配为目标，对各孔型尺寸进行了优化设计。

The temperature field of the bar in and out the deformation zone during continuous rolling is simulate by finite element method .

采用有限元法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。

Experiments show that the method can effectively segment touching bar images and obtain reliable the number of bars .

实验证明，这种方法能准确分割粘连棒材图像，实现可靠的棒材计数。

These defaults must be eliminated by straightened in the later process , so that the flat product can be obtained .

为了消除弯曲，获得平直成品，棒材需要在矫直机上进行矫直。

if the forces are reversed in direction , causing the bar to be compressed, they are called compressive stresses .

如果所施的力是反方向的，导致棒材被压迫，这称为压应力。

The ultimate tensile strength and elongation of extrusion bar after forging process was much higher than that of the direct extrusion bar .

先锻后挤工艺棒材最终抗拉强度和断后延伸率高于直接挤压棒材。

The temperature field of the bar in and out the deformation zone during rolling is simulated by FEM .

采用有限元方法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。

Output terminals of a power supply (1 ) are communicated with two ends of the bar by wires respectively .

电源（1 ）的输出端分别通过导线与棒材的两端连通。

This paper introduces technological design and equipment of hot delivery and hot charge in Tanggang and its notable economic benefit .

介绍了唐钢棒材厂开发热送热装的工艺设计情况及取得的显著经济效益。

Including filtering and cleaning up, section seperation of steel-bar, examination and detection of seperation opening .

包括滤波去噪、棒材区域分割、分离开口状况检测等。

Rod material specification regarding to the diametre of round rod . Square rod and multi- shaped rod regarding to inside diametre.

棒材规格指圆棒直径、方棒及多角形棒指内切圆直径。

High speed and reliability ; automatically or semi-automatically processing for bar and hexagon typed materials .

速度快稳定性高，棒材及六角材料均可自动或半自动加工。

IRON AND STEEL . CASE HARDENED ALLOY STEELS FOR SOLID HIGHLY-STRESSED MECHANICAL PARTS. GRADES. SEMI-FINISHED PRODUCTS AND BARS.

冶金产品 .高负载重型机械结构用渗碳合金钢 .牌号 .半成品和棒材

Wire : usually produced from hot -roiled rod by drawing ; smaller than 4mm in diameter usually with a round section .

线材 --一般用热轧细棒材拔拉而成，：直径小于 4mm ，横断面一般为圆形。

The paper introduces the control principle of piston case at bar plant, and put forward improving ways and preventable measure .

介绍了新钢棒材轧制活套控制原理及系统设置，并通过实际应用，提出了改进和预防措施。

P There shall be no welds in wires and bars . Individual wires of strands may contain staggered welds made only before cold drawing.

在线材与棒材内部不能有焊接。钢绞线内的单条钢绞线可能有交错焊缝，但必须是在冷拉之前。

The product is used for bar packing of the mechanical processing field .

本产品用于机械加工领域的棒材打包。

for case hardening respective decarbonizing respective bright annealing of long rod, bars and or wire bundles.

适于长条料、棒材或金属线包的表面渗碳、脱碳、光亮退火。

棒材

棒材

bar