大家在查：考门亚卡 A55 half-breed transthoracic LHG aspergilloma 罗布·菲尔德曼 50至70 戈尔登西 preventive measure

柱塞

na.pommel; trunk piston; faucet
网络plunger; ram; plunger piston

柱塞

英-汉网络释义

柱塞

na.

1.pommel; trunk piston; faucet; displacement ram; plunger piston; ramming piston; bar piston

1

The surface receiving mechanism detects the plunger when it arrives at surface and, through the control system, prepares for the next cycle .

当柱塞到达地面时地面接收机构对柱塞进行检测。同时，通过控制系统准备下一个循环。

2

An ultrasonic flame spraying technology is adopted for the reinforcement of the surface of the plunger piston .

柱塞表面的强化采用超音速火焰喷涂技术。

3

The molding portion is composed of a plunger and a working chamber which is arranged below the plunger and is coaxial with the plunger.

成型部分由柱塞和柱塞下方与其保持同轴的工作室构成。

5

In this paper the dynamic optimum design was carried out for the crankshaft of a horizontal reciprocating emulsion pump with three pistons.

本文对矿用卧式三柱塞往复乳化液泵曲轴进行了动态优化设计研究。

6

7

Disassemble and disconnect the Ball Reversal Valve . Blow the valve clean with compressed air. Reassemble and reinstall the valve .

卸下并拆开下降阀，用压缩空气将柱塞吹净，然后装入，重新安上。

8

The relative axial movement of the plunger in relation to the piston causes a vacuum to be created within the plunger .

柱塞相对于活塞的相对轴向运动在柱塞内造成真空。

9

When the control system opens the well for production , the plunger and a column of fluid are carried up the tubing string.

当控制系统开井生产时，柱塞和液柱沿油管柱向上被携带。

10

The pump bodies are arranged on the base in pairs and each pair of the pump bodies is used as an independent plunger pump device .

泵体成对设置在基座上，每一对则作为一个独立的柱塞泵装置。

11

A seal between the piston and the interior of the plunger prevents air or fluid from passing by the piston into the plunger .

在活塞和柱塞内部之间的密封件可防止空气或液体利用活塞而进入柱塞。

12

If we do not detect more or more dangerous mistakes or damages , these cylinders and pistons can well function over a long period .

如果我们没有发现更严重的错误和损坏的话，此油缸和柱塞可以很好的使用相当长的一段时间。

13

and a cap disposed on the upper end of the inner plunger portion .

以及顶盖，该顶盖设置在内部柱塞部分的上端上。

14

The only function of the pre-plasticizer is plasticizing , injection is left to another unit called the plunger .

预熔器只做塑化，注射由独立的柱塞负责。

15

Special extrusion technologies (complex extrusion, dual plunger extrusion ) are adopted in accordance with the characteristics .

针对其特殊性采取特殊的挤出成型工艺（复合挤出、双柱塞式挤出）。

18

The barrel is open at both ends to receive a plunger at the plunger end and a needle at the opposite end .

针筒两端都开口，以在柱塞端收容柱塞并在相反端收容针头。

20

The main products include beth grams of axial piston pump, general axial pump, hydraulic motor assembly and rotor assembly and spare parts .

赛克思产品主要包括柱塞式通轴泵、斜轴泵、液压马达总成和转子总成及零配件。

21

Insert attached sprayer into the bottle. Remove protective cap and safety clip. Press plunger down briskly while breathing through nose.

插入式喷管，移开保护盖和安全夹，紧压柱塞，让鼻子自在呼吸。

22

The solenoid plunger pulls the vent valve down , blocking off the passage to the charcoal canister .

电磁柱塞拉下通气阀，堵住通向活性碳罐的通路。

23

24

This thesis focuses mainly on the design and simulation of the sea water hydraulic piston pump .

本文的中心任务是盘配流式海水柱塞泵设计及仿真研究。

25

and a plunger piston which is inserted into the through hole for moving the amorphous alloy flux placed on the plunger piston.

以及柱塞，其插入贯穿孔中以移动置于柱塞上的非晶合金熔体；

26

The main content is as follows : 1 . The supporting way of the axial variable displacement piston pump is researched .

论文主要完成以下研究内容：1 。对轴向变量柱塞泵的支撑方式进行了研究。

27

Second, conduct the systematic experimental research of physical simulation for continuous gas lifting with Two-Piece plunger .

开展了分体式柱塞连续气举的物理模拟实验研究。

热词推荐

大家在看