大家在查： beaus Fiori 2月18日 Focii 孙子女听讯 57：2 威廉夏弗纳 M45 Barometre

拉弯

n.stretch bending
网络CURVE-MAKING; stretch-forming; Weerawan

拉弯

英-汉网络释义

拉弯

stretch bending

Bending test_翻译 ... 弯辊： bending roller 拉弯： stretch bending 弯矩载荷： Bending ...

CURVE-MAKING

铝加工行业英语词汇_中铝网 ... 拉丝 BRUSH 拉弯 CURVE-MAKING 栏杆 BALUSTRADE ...

stretch-forming

英汉日模具用语集——s下-刘建平-信息化博客 ... stretcher frame 线状拉毛欠缺 stretch-forming 拉弯 stretching 拉延 ...

Weerawan

微拉弯（Weerawan）：「志工告诉我，慈济要做素粽，希望大家一起来帮忙，今天我就来，来帮忙切碎萝卜乾和香菇，准备 …

Draw-Bend

...其同工[24]以实验观察铝合金 6022-T4 拉弯（Draw-Bend）成形后之回弹量，发现当拉伸应力趋近於降服应力时，回弹量可 …

Worawan

69岁翁拉弯 (Worawan) 灾民分享：11月1日凌晨5.00点水开始淹没社区，水灾期间就到外府安顿，但也常常联络邻居，了解最 …

例句：

The key to numerical simulation of stretch bending of extrusions is determination of loading path of the clamped ends of extrusion .

型材拉弯成形有限元模拟关键在于型材夹持端运动轨迹的合理描述。

Finally, the detailed design process of a trajectory for 3D stretch bending of a rectangular hollow profile is given as an example .

以中空矩形截面型材三维拉弯为例，给出了轨迹设计的详细流程。

Later the branches of a tree were pulled and warped in a special way to pre-shape the tree for making this type of clogs.

后期树的枝条用一种特别的方法拉弯以使树预先成形好制作这种木底鞋。

The process of stretch bending has been widely used in the sheet metal forming of car and aircraft .

因此拉弯工艺在飞机、汽车的弯曲件生产中得到了广泛的应用。

The right thing to do now is to curved a drill pipe .

当前要做的事是拉弯一根钻杆。

The right thing to do now is to bent a drill pipe .

现在要做的事是拉弯一根钻杆。

Researchers in USA developed multi-point stretching equipment in 1999.

美国学者在 1999年开发出了多点拉弯成形装置；

Abstract : A perturbance method to analyze the process of stretch-bending is introduced in this paper.

摘要：介绍了分析拉弯成形的摄动方法。

Pull back the tree and shoot me into the pond .

把树拉弯，把我射到水池里。

The results of calculation show that the springback for draw-bending is smaller than that for pure bending .

计算结果表明，拉弯成形时的回弹小于纯弯曲时的回弹。

Parameters Selection of Mechanical Properties and Process Control in Tension Levelling Line used for Aluminium Strip

铝带材拉弯矫直机力能参数选择及工艺控制

Numerical simulation of a stretch-bending process for extruded aluminum rectangular tubes

铝合金矩形管拉弯成形过程的数值模拟

The linear Stochastic Finite Element Analysis For an Edge - Cracked Panel Subject to Remote Tension and Bending

拉、弯组合下单边裂纹板的线弹性解的随机有限元分析

The Non -linear Finite Element Analysis for an Edge-cracked Panel Subject to Remote Tension and Bending

拉、弯组合下单边裂纹板的非线性有限元分析

Effect Rule of Pre-Stretch Force on Angle Profile Part Spring-Back in the Process of Stretch-Bending

拉弯过程中预拉力对角型材零件回弹的影响规律

An optimum design method for composite laminates considering coupling effect between bending and tension

一种考虑拉弯耦合的复合材料层板的优化设计方法

Research on Springback of Aluminum Extrusions in Asymmetrical Stretch Bending Processes

非对称型材数控拉弯成形回弹研究

Mechanics and Spring-back Analysis for the Stretch-bending Process of Extruded Profile with Lateral Compression

等边角型材带侧压型材拉弯的力学与回弹分析

A simplified calculation about section selection of shaped steel members subject to bending and tension

型钢截面拉弯构件的一种简化计算方法

Design and research on the main distribution gear box for tension and bending leveling machine

拉弯矫直机主分配箱设计与研究

Elongation Intelligence Control System for Aluminum Strip Tension Leveler

铝带拉弯矫直机延伸率智能控制系统

Computation of electrical parameter of hot - stretch - bend and creep forming for section titanium

钛型材热拉弯蠕变成形电参数的计算

Finite element simulation for stretch-wrap bending of aluminium profile with complex cross section

复杂截面铝合金型材拉弯成形有限元模拟

A numerical study on the force-controlled stretch bending of aluminum extrusion with complex cross section

复杂截面型材力控制拉弯成形数值模拟分析

The Simulation and Failure Analysis of Carrying Capacity of Stretching-bending Rectifier

拉弯矫正机承载能力的仿真计算及故障分析

拉弯

拉弯