大家在查：克•科克莱态床 PopularFront 夏佩特纳·普孙毓超 WHEA jellifying 百分之零点艾伦•康

加工完成

网络Finishing

加工完成

加工完成

加工完成

Finishing

塑料模术语中英文-机械资讯-马棚网 ... Void 中空 Finishing 加工完成 Deterioration 龟裂 ...

1

Allow a case of finished product to pass through the metal detector first , before the test , to ensure it does not contain any metal .

在测试前，要对加工完成的产品用金属探测器进行 1 次检验以确保产品中不含有任何金属成分。

2

The processing course of having the glass double straight line flat edges roughly and finely polished as well can be finished at one time .

玻璃双直线平边的粗磨、精磨及两侧倒角的粗磨可一次性加工完成。

3

As the progress is complete , there will be specialized inspector make inspection to the products with special inspection tools .

加工完成后由专门检验员用专用检测工具进行检验。

5

adhesive and bookbinding can be done by a spinning wheel offset printing online processing is complete , fast and inexpensive.

胶粘装订可以通过轮转胶印联机加工完成，速度很快，成本较低。

6

After processing the packing -box, the inner anti-changing code is hidden in the inner part of the sticking-joint .

包装盒加工完成后内部防窜货编码藏于粘接处内部。

7

The specialized inspector inspects the bore diameter, pitch, chamfer and finish degree of bore wall .

加工完成后由专门检验员检验孔径、孔距、倒角大小、孔壁光洁度。

8

Transport the finished clamps to the next step .

将加工完成的夹钳运到下一个工序。

9

After processing , specialized inspector makes spot check to ensure the acceptability.

加工完成后由专门检验员用专用测量工具检验，保证产品质量。

10

The specialized inspector inspects the products after processing .

加工完成后由专门检验员负责检验。

11

The specialized inspector re-inspects products after processing .

加工完成后由专门检验员进行再次检验。

13

Would material be available to produce samples once the tooling is completed ?

加工完成后。是否有能够用于生产样品的材料？。

14

When the process is complete, the corresponding specialized inspector finishes sizes finally .

加工完成后由相应检验员检验最终加工尺寸。

15

Using special measuring tools to inspect the products after processing .

加工完成后用专用量具检验。

16

Machining after the completion of all the assembly ago , I informed the Secretary to test .

所有机械加工完成后总装配前，通知我司来检验。

17

Before completing linkage screw in the machining , finished products are needed to do the pre-tensile test .

连杆螺钉在加工完成后成品交验前，要求进行预拉伸试验。

18

After 6 . 8 flanges pressurizing cover should spread anticorrosive oil to avoid impact after processing .

8 法兰加工完成后应在密封面上涂防锈油，并防止密封面碰伤。

19

Using the special sample plate to make inspection after processing .

加工完成后用专用样板检验。

热词推荐

大家在看